Inizia

Cerca negli script per "point of control"

PhantomFlow AccumulationDetectorThe PhantomFlow AccumulationDetector indicator analyzes the volume profile and displays potential accumulation based on the selected timeframe in the settings. This indicator can be used both as zones for trend following and for identifying reversals, as shown in the examples on the chart. The logic behind the formation of the accumulation zone is based on the fact that the POC (Point of Control) of the current zone is within the Volume Area range of the previous period. Optimal settings for the working timeframe should be chosen visually, and the size of the zones should not be too large or too small. Additionally, it's advisable not to consider overly wide zones during increased volatility. Consecutive zones within the same range often indicate a potential reversal. We borrowed the volume profile calculation code from @LonesomeTheBlue. Thank you for the work done!
Indicatore Pine Script®
di PhantomFlow
5
Volume Profile - BearJust another Volume Profile but you can fit into your chart better by moving back and forth horizontally. also note you can fix the number of bars to show the volume by that way you can use a fib retracment to line up high/low volume nodes with fib levels... see where price as bad structure. or just play with the colors to make a cool gradient? Volume Profile is a technical analysis tool used by traders to analyze the distribution of trading volume at different price levels within a specified time frame. It helps traders identify key support and resistance levels, potential areas of price reversals, and areas of high trading interest. Here's how to read Volume Profile on a trading chart: 1. **Choose a Time Frame**: Decide on the time frame you want to analyze. Volume Profile can be applied to various time frames, such as daily, hourly, or even minute charts. The choice depends on your trading style and goals. 2. **Plot the Volume Profile**: Once you have your chart open, add the Volume Profile indicator. Most trading platforms offer this tool. It typically appears as a histogram or a series of horizontal bars alongside the price chart. 3. **Identify Key Elements**: a. **Value Area**: The Value Area represents the price range where the majority of trading volume occurred. It is often divided into three parts: the Point of Control (POC) and the upper and lower value areas. The POC is the price level where the most trading activity occurred and is considered a significant support or resistance level. b. **High-Volume Nodes**: High-volume nodes are price levels where there was a significant amount of trading volume. These nodes can act as support or resistance levels because they represent areas where many traders had their positions. c. **Low-Volume Areas**: Conversely, low-volume areas are price levels with little trading activity. These areas may not provide strong support or resistance because they lack significant trader interest. 4. **Interpretation**: - If the price is trading above the POC and the upper value area, it suggests bullish sentiment, and these levels may act as support. - If the price is trading below the POC and the lower value area, it suggests bearish sentiment, and these levels may act as resistance. - High-volume nodes can also act as support or resistance, depending on the price's current position relative to them. 5. **Confirmation**: Volume Profile should be used in conjunction with other technical analysis tools and indicators to confirm trading decisions. Consider using trendlines, moving averages, or other price patterns to validate your trading strategy. 6. **Adjust for Different Time Frames**: Keep in mind that Volume Profile analysis can yield different results on different time frames. For example, a support level on a daily chart may not hold on a shorter time frame due to intraday volatility. 7. **Practice and Experience**: Like any trading tool, reading Volume Profile requires practice and experience. Analyze historical charts, paper trade, and refine your strategies over time to gain proficiency. 8. **Stay Informed**: Stay updated with market news and events that can impact trading volume. Sudden news can change the significance of volume levels.
Indicatore Pine Script®
di thebearfib
3
Volume Profile Fixed Range Support and Resistance LevelsThis script is based on the excellent Volume Profile / Fixed Range indicator by @LonesomeTheBlue, so all credit for the foundations of this indicator goes to @LonesomeTheBlue I basically made 5 instances of the original script and added horizontal lines at the beginning and end of the each Value Area. To use the script as a support and resistance tool without the Value Areas and Point of Control (POC) labels you just need to untick "Boxes" and "Labels" in the "Style" section of the “Settings”. The default look-back periods (in bars) are 7, 30, 60, 180 and 365, but you can change this or the colour of the lines easily in the “Settings”. The dashed lines are the respective POC. I find this tool to be very useful for quickly identifying interest levels on any chart while also ensuring a certain amount of objectivity in your TA. Hope you find it useful and thanks again to @LonesomeTheBlue for going through the trouble of coding this and being so generous to share it with the rest of us! Good luck out there!
Indicatore Pine Script®
di vranabanana
6
Volume and vPOC InsightsThe vPOC or volume point of control shows where most of the volume was traded. This is important because this is where the institutions and market makers have opened their positions, and these are the ones that move the markets! This indicator is designed to cut through the volume noise, and enable the hiding of lower volume data. The main setting allows you to define a lookback, and obscure the candles whose volume is less than x % of the highest volume in this lookback. Of the remaining candles, their vPOC will be displayed. There are extra settings to extend naked vPOCs, as well as the highs and lows of these high volume candles, plus an EMA based on the vPOC price levels. I must credit quantifytools @quantifytools who allowed me to utilize his code, for finding vPOCs using lower timeframe candles - there are comments in the code also. It works perfectly so why reinvent the wheel?
Indicatore Pine Script®
di Texmoonbeam
16
RS: Market ProfileA Market Profile (time price opportunity) implementation with an option to mark a point of control (POC) based on volume. Config: Hide default candles. Select a session time using exchange timezone. Experiment with tick multiplier value to achieve desired level of detail. Choose the symbols of your choice, e.g. squares or A-Z chars. For multiple sessions you will have to add additional instances of this script with a different time configuration. Limitations: TradingView has a hard limit for the number of characters (500), if it's reached, label rendering stops. Try increasing tick multiplier value to reduce the number of labels rendered or reduce the window size. Features: Use symbols or A-Z chars for TPOs Mark POC Calculate Value Area (volume or time based) Highlight single prints (SP) Highlight VWAP Show daily bar Highlight Open and Close Highlight current price row (during live market) Highlight initial balance (IB)
Indicatore Pine Script®
di inversionflow
93
Volume profile zonesHi all! This script calculates and shows the volume profile for the range of a higher timeframe candle. It then shows support or resistance (/supply or demand) zones based on the volume profiles with the most volume. The defaults are just my preferred settings so feel free to play with them! Also feel free to let me know about bugs and features. I already have a list of features to make, e.g.: base on pivots more info zone calculations, e.g. breaks and retests, virgin point of control etc. add alerts get rid of getPriceLevels() get rid of _barVolumeProfile prefix handle realtime ... Best of trading luck!
Indicatore Pine Script®
di mickes
45
[Pt] Periodic Volume ProfileThis script is an attempt to recreate the Periodic Volume Profile that is built-in by TradingView, with slightly different features. Related blog: www.tradingview.com This script is based on another script "Volume Profile, Pivot Anchored" by @dgtrd *Note that only limited number Volume Profile can be displayed on the chart due to limitations on displaying boxes and lines. Description This Periodic Volume Profile (PVP) indicator allows trades to view volume profiles for periods longer than the current timeframe. The indicator builds one general volume profile for each new period, set by the user through the “Periodic Timeframe” input parameter. This script also has the option to extend Point of Control (POC) lines with optional end conditions: Until Bar Touch, Until Last Bar, Until Bar Cross, or None, which extends to the right. Signals are generated for Naked POC touches and crosses by a triangle symbol and a cross symbol, by default. Alerts are available for POC touches and crosses. What is Volume Profile? Volume profile is a technical analysis tool that shows the volume of trades at different prices for a given security or market over a specific period of time. Volume profile can be used to identify key levels of support and resistance, as well as to assess the overall supply and demand for a security. For example, if there is a high volume of trades at a particular price level, this may indicate that there is a significant level of support or resistance at that price. On the other hand, if there is relatively low volume at a particular price, this may indicate that there is not much interest in trading at that level. Traders can use volume profile to identify trends, make trading decisions, and set stop-loss and take-profit orders. It can also be useful for identifying patterns such as "pockets of liquidity," which are areas where there is a high volume of trades but relatively little price movement. It is important to note that volume profile should be used in conjunction with other technical analysis tools and should not be relied upon in isolation. It is also important to consider the overall context and market conditions when interpreting volume profile data. Key Difference with TradingView's PVP indicator - TradingView's PVP intraday period does not align with standard intraday timeframes as it is determined by # of bars. This script provides volume profiles that aligns with higher timeframe periods. Enjoy~!
Indicatore Pine Script®
di PtGambler
80
Realtime FootprintThe purpose of this script is to gain a better understanding of the order flow by the footprint. To that end, i have added unusual features in addition to the standard features. I use "Real Time 5D Profile by LucF" main engine to create basic footprint(profile type) and added some popular features and my favorites. This script can only be used in realtime, because tradingview doesn't provide historical Bid/Ask date. Bid/Ask date used this script are up/down ticks. This script can only be used by time based chart (1m, 5m , 60m and daily etc) This script use many labels and these are limited max 500, so you can't display many bars. If you want to display foot print bars longer, turn off the unused sub-display function. Default setting is footprint is 25 labels, IB count is 1, COT high and Ratio high is 1, COT low and Ratio low is 1 and Delta Box Ratio Volume is 1 , total 29. plus UA , IB stripes , ladder fading mark use several labels. ///////// General Setting /////////// Resets on Volume / Range bar : If you want to use simple time based Resets on, please set Total Volume is 0. Your timeframe is always the first condition. So if you set Total Volume is 1000, both conditions(Volume >= 1000 and your timeframe start next bar) must be met. (that is, new footprint bar doesn't start at when total volume = exactly 1000). Ticks per row and Maximum row of Bar : 1 is minimum size(tick). "Maximum row of Bar" decide the number of rows used in one footprint. 1 row is created from 1 label, so you need to reduce this number to display many footprints (Max label is 500). Volume Filter and For Calculation and Display : "Volume Filter" decide minimum size of using volume for this script. "For Calculation and Display" is used to convert volume to an integer. This script only use integer to make profile look better (I contained Bid number and Ask number in one row( one label) to saving labels. This require to make no difference in width by the number of digits and this script corresponds integers from 0 to 3 digits). ex) Symbol average volume size is from 0.0001 to 0.001. You decide only use Volume >= 0.0005 by "Volume Filter". Next, you convert volume to integer, by setting "For Calculation and Display" is 1000 (0.0005 * 1000 = 5). If 0.00052 → 5.2 → 5, 0.00058 → 5.8 → 6 (Decimal numbers are rounded off) This integer is used to all calculation in this script. //////// Main Display /////// Footprint, Total, Row Delta, Diagonal Delta and Profile : "Footprint" display Ask and Bid per row. "Total" display Ask + Bid per row. "Row Delta" display Ask - Bid per row. "Diagonal Delta" display Ask(row N) - Bid(row N -1) per row. Profile display Total Volume(Ask + Bid) per row by using Block. Profile Block coloring are decided by Row Delta value(default: positive Row Delta (Ask > Bid) is greenish colors and negative Row Delta (Ask < Bid) is reddish colors.) Volume per Profile Block, Row Imbalance Ratio and Delta Bull/Bear/Neutral Colors : "Volume per Profile Block" decide one block contain how many total volume. ex) When you set 20, Total volume 70 display 3 block. The maximum number of blocks that can be used per low is 20. So if you set 20, Total volume 400 is 20 blocks. total volume 800 is 20 blocks too. "Row Imbalance Ratio" decide block coloring. The row imbalance is that the difference between Ask and Bid (row delta) is large. default is x3, x2 and x1. The larger the difference, the brighter the color. ex) Ask 30 Bid 10 is light green. Ask 20 Bid 10 is green. Ask 11 Bid 10 is dark green. Ask 0 Bid 1 is light red. Ask 1 Bid 2 is red. ask 30 Bid 59 is dark green. Ask 10 Bid 10 is neutral color(gray) profile coloring is reflected same row's other elements(Ask, Bid, Total and Delta) too. It's because one label can only use one text color. /////// Sub Display /////// Delta, total and Commitment of Traders : "Delta" is total Ask - total Bid in one footprint bar. Total is total Ask + total Bid in one footprint bar. "Commitment of traders" is variation of "Delta". COT High is reset to 0 when current highest is touched. COT Low is opposite. Basic concept of Delta is to compare price with Delta. Ordinary, when price move up, delta is positive. Price move down is negative delta. This is because market orders move price and market orders are counted by Delta (although this description is not exactly correct). But, sometimes prices do not move even though many market orders are putting pressure on price , or conversely, price move strongly without many market orders. This is key point. Big player absorb market orders by iceberg order(Subdivide large orders and pretend to be small limit orders. Small limit orders look weak in the order book, but they are added each time you fill, so they are more powerful than they look.), so price don't move. On the other hand, when the price is moving easily, smart players may be aiming to attract and counterattack to a better price for them. It's more of a sport than science, and there's always no right response. Pay attention to the relationship between price, volume and delta. ex) If COT Low is large negative value, it means many sell market orders is coming, but iceberg order is absorbing their attack at limit order. you should not do buy entry, only this clue. but this is one of the hints. "Delta, Box Ratio and Total texts is contained same label and its color are "Delta" coloring. Positive Delta is Delta Bull color(green),Negative Delta is Delta Bear Color and Delta = 0 is Neutral Color(gray). When Delta direction and price direction are opposite is Delta Divergence Color(yellow). I didn't add the cumulative volume delta because I prefer to display the CVD line on the price chart rather than the number. Box Ratio , Box Ratio Divisor and Heavy Box Ratio Ratio : This is not ordinary footprint features, but I like this concept so I added. Box Ratio by Richard W. Arms is simple but useful tool. calculation is "total volume (one bar) divided by Bar range (highest - lowest)." When Bull and bear are fighting fiercely this number become large, and then important price move happen. I made average BR from something like 5 SMA and if current BR exceeds average BR x (Heavy Box Ratio Ratio), BR box mark will be filled. Box Ratio Divisor is used to good looking display(BR multiplied by Box Ratio Divisor is rounded off and displayed as an integer) Diagonal Imbalance Count , D IB Mark and D IB Stripes : Diagonal Imbalance is defined by "Diagonal Imbalance Ratio". ex) You set 2. When Ask(row N) 30 Bid(row N -1)10, it's 30 > 10*2, so positive Diagonal Imbalance. When Ask(row N) 4 Bid(row N -1)9, it's 4*2 < 9, so negative Diagonal Imbalance. This calculation does not use equals to avoid Ask(row N) 0 Bid(row N -1)0 became Diagonal Imbalance. Ask(row N) 0 Bid(row N -1)0, it's 0 = 0*2, not Diagonal Imbalance. Ask(row N) 10 Bid(row N -1)5, it's 10 = 5*2, not Diagonal Imbalance. "D IB Mark" emphasize Ask or Bid number which is dominant side(Winner of Diagonal Imbalance calculation), by under line. "Diagonal Imbalance Count" compare Ask side D IB Mark to Bid side D IB Mark in one footprint. Coloring depend on which is more aggressive side (it has many IB Mark) and When Aggressive direction and price direction are opposite is Delta Divergence Color(yellow). "D IB Stripes" is a function that further emphasizes with an arrow Mark, when a DIB mark is added on the same side for three consecutive row. Three consecutive arrow is added at third row. Unfinished Auction, Ratio Bounds and Ladder fading Mark : "Unfinished Auction" emphasize highest or lowest row which has both Ask and Bid, by Delta Divergence Color(yellow) XXXXXX mark. Unfinished Auction sometimes has magnet effect, price may touch and breakout at UA side in the future. This concept is famous as profit taking target than entry decision. But, I'm interested in the case that Big player make fake breakout at UA side and trapped retail traders, and then do reversal with retail traders stop-loss hunt. Anyway, it's not stand alone signal. "Ratio Bounds" gauge decrease of pressure at extreme price. Ratio Bounds High is number which second highest ask is divided by highest ask. Ratio Bounds Low is number which second lowest bid is divided by lowest bid. The larger the number, the less momentum the price has. ex)first footprint bar has Ratio Bounds Low 2, second footprint bar has RBL 4, third footprint bar has RBL 20. This indicates that the bear's power is gradually diminishing. "Ladder fading mark" emphasizes the decrease of the value in 3 consecutive row at extreme price. I added two type Marks. Ask/Bid type(triangle Mark) is Ask/Bid values are decreasing of three consecutive row at extreme price. Row Imbalance type(Diamond Mark) are row Imbalance values are decreasing of three consecutive row at extreme price. ex)Third lowest Bid 40, second lowest Bid 10 and lowest Bid 5 have triangle up Mark. That is bear's power is gradually diminishing. (This Mark only check Bid value at lowest price and Ask value at highest price). Third highest row delta + 60, second highest row delta + 5, highest delta - 20 have diamond Mark. That is Bull's power is gradually diminishing. Sub display use Delta colors at bottom of Sub display section. ////// Candle & POC ///////// candle and POC : Ordinary, "POC" Point of Control is row of largest total volume, but this script'POC is volume weighted average. This is because the regular POC was visually displayed by the profile ,and I was influenced LucF's ideas. POC coloring is decided in relation to the previous POC. When current POC is higher than previous POC, color is UP Bar Color(green). In the opposite case, Down Bar color is used. POC Divergence Color is used when Current POC is up but current bar close is lower than open (Down price Bar),or in the opposite case. POC coloring has option also highlight background by Delta Divergence Color(yellow). but bg color is displayed at your time frame current price bar not current footprint bar. The basic explanation is over. I add some image to promote understanding basic ideas.
Indicatore Pine Script®
di akutsusho
65
Market Profile Fixed ViewSome instruments does not provide any volume information, therefore, as a fixed volume profile user, I needed a fixed market profile indicator to use the same principles, regardless of whether the volumes are available or not. This script draws a market profile histogram corresponding to price variations within a specific duration, you only need to specify Start and End date/time values to see the histogram on your chart. Details Two lines corresponding to highest/lowest prices are displayed around the histogram The redline corresponds to the POC (point of control) Options Start calculation End calculation Bars number (histogram resolution, currently locked to a max value of 50 bars) Display side/Width (allows to modify size of bars, to the left or to the right) Bars/Borders/POC Color customization Notes This script will probably be updated (to add VAH/VAL zones, and maybe other options). However, some common market profile attributes have not been implemented yet since I don't really use them)
Indicatore Pine Script®
di noop-noop
70
MarketProfileHello All, The said script plots MarketProfile of previous Session. Additional Feature is that we can plot Developing pocLine on realtime basis. The script plots Va High, Va Low and Point of Control of previous session, which becomes reference for tracking the price behavior in next session. Hope this can be further developed to include the Characters on the chart. It provides ability to plot profile for different timeframes The script has borrowed Ideas from @lonesometheblue, @juliusCrypto and @Ricardo Sanstos
Indicatore Pine Script®
di alphatrader09
17
Low Timeframe POCI have recently made a High Timeframe POC script (HFT POC) which is pretty popular. Thanks for this! There are many requests to include lower timeframes in this script, that is why I created this script. I could have incorporated all the timeframe POC's into one indicator but I went this route to keep things more organized between all the different timeframes. Currently included: Daily, 6H, 3H and 1H /* DEFINITION */ Point Of Control (= POC) is a price level at which the heaviest volumes were traded. /* HOW TO TRADE WITH THIS INDICATOR */ The basis for POC is determining bias on whichever timeframe you choose. 1. Identify a POC on the timeframe of your choosing. /* If you choose the lowest timeframe (1H here) then always make sure to look at the higher timeframes to see how it is trading against a HTF POC. 2. When the price is moving away from the POC (either to the upside or downside) this can confirm or invalidate a trade. 3. You can now enter the trade on bias or wait for a retest of the same POC. /* EXAMPLE TRADES /* Here is a screenshot of some of the trades that are possible using these Low Timeframe POC's and some common sense. s3.tradingview.com
Indicatore Pine Script®
di p2pasta
5
High Timeframe POCBecause the big Bitcoin crash I have been looking a lot at high timeframe metrics. I never spent much time learning POC so I decided to create a little script for determining these on higher timeframes. Currently included: Monthly, 3 months and 6 months. /* DEFINITION */ Point Of Control (= POC) is a price level at which the heaviest volumes were traded. Value Area High/Low (=VAH/VAL) is a range of prices where the majority of trading volume took place. Naturally, Value Area High being the top price level and Value Area Low being the lowest. POC always is between the two. /* HOW TO TRADE WITH THIS INDICATOR */ The basis for POC is determining bias on whichever timeframe you choose. 1. Identify a POC on the timeframe of your choosing. /* If you choose a "low" timeframe (monthly here) then make sure to look at the higher timeframes to see how it is playing against a higher timeframe POC. 2. When the price is moving away from the POC (either to the upside or downside) this will confirm or invalidate the trade. 3. You can now enter the trade on bias or wait for a retest of the same POC. /* EXAMPLE TRADES /* Here is a screenshot of some of the trades that are possible solely using the POC and some common sense. s3.tradingview.com
Indicatore Pine Script®
di p2pasta
24
POCs and VAHs VALs - All and Non-BrokenThe "POC and VAH VAL - All and Non-Broken" POC = Points of Control VAH = Value Area High VAL = Value Area Low This indicator aims to show you on the 5 minute time frame all POCs and VAHs/VALs and Non-Broken POCs and VAHs/VALs. (Non-Broken are POCS and VAHs/VALS where price action has not since crossed its path) In the screen image above I have used VPVR to back test on BYBIT:BTCUSDT. The POCs and VAHs/VALs for each day can be seen. Also there is an option to see non-broken POCS and VAHs/VALs within the settings. All display options are selectable within the settings. The indicator is not as precise as using the VPVR but is a lot quicker and gives you a quick snapshot to assist with your technical analysis. In the screen shot above are some examples highlighted with yellow circles (resistance at POC and VAHs/VALs). Thanks goes to: ahancock for use of his code. Bjorn Mistiaen on StackOverFlow for his assistance. Disclaimer: Indicator has been coded to only show on 5 min time frame (after back testing seemed most accurate). Only back tested on BYBIT:BTCUST. There are some slight discrepancies. Back tested against VPVR settings: Row Size 500, Value Area 70. Maximum of 500 lines will only be shown.
Indicatore Pine Script®
di Frien_dd-DisDev
62
Baseline-C [ID: AC-P]The "AC-P" version of jiehonglim's NNFX Baseline script is my personal customized version of the NNFX Baseline concept as part of the NNFX Algorithm stack/structure for 1D Trend Trading for Forex. Everget's JMA implementation is used for the baseline smoothing method, with optional ATR bands at 1.0x and 1.5x from the baseline. NNFX = No Nonsense Forex Baseline = Component of the NNFX Algorithm that consists of a single moving average Baseline ---> Meant to be used in conjunction with ATR/C1/C2/Vol Indicator/Exit Indicator as per NNFX Algorithm setup/structure. C1 is 1st Confirmation Indicator, C2 is 2nd Confirmation Indicator. JMA (Jurik Moving Average) is used for the baseline and slow baseline. A slow baseline option is included, but disabled by default. The faint orange/purple lines are 1.0x/1.5x ATR from the Baseline, and are what I use as potential TP/SL targets or to evaluate when to stay out of a trade (chop/missed entry/exit/other/ATR breach), depending on the trade setup (in conjunction with C1/C2/Vol Indicator/Exit Indicator) This script is heavily based upon jiehonglim's NNFX Baseline script for signaling, barcoloring, and ATR. SSL Channel option included but disabled by default (Erwinbeckers SSL component) POC (Point of Control) from Volume Profile is included/enabled by default for both the current timeframe and 12HR timeframe 03.freeman's InfoPanel Divergence Indicator was used a reference to replace the current/previous ATR information infopanel/info draw from jiehonglim's script. I'm not sure whether I like the previous way ATR info was displayed vs how I have it currently, but it's something that is completely optional: Specifically: I am tuning this baseline/indicator for 1D trading as part of the NNFX system, for Forex. DO NOT USE THIS INDICATOR WITHOUT PROPER TUNING/ADJUSTMENT for your timeframe and asset class. Note about lack of alerts: Alerts for baseline crosses (and other crosses) have been purposefully omitted for this version upon initial publication. While getting alerts for baseline crosses under certain conditions/filtered conditions that eliminate low-importance signals and crossover whipsaw would be great, it's something I'm still looking into. SPECIFICALLY: There are entry, exit, take profit, and continuation signal components in relation to the Baseline to the rest of the NNFX Algorithm stack (ATR/C1/C2/Vol Indicator/Exit Indicator), including but limited to the "1 candle rule" and the "7 candle rule" as per NNFX. Implementing alerts that are significant that also factor in these rules while reducing alert spam/false signals would be ideal, but it's also the HTF/Daily chart - visually, entry/exit/continuation signal alignment is easy to spot when trading 1D - alerts may be redundant/a pursuit in diminishing returns (for now). //------------------------------------------------------------------- // Acknowledgements/Reference: // jiehonglim, NNFX Baseline Script - Moving Averages // // Fractured, Many Moving Averages // // everget, Jurik Moving Average/JMA // // 03.freeman, InfoPanel Divergence Indicator // // Ggqmna Volume stops // // Libertus RSI Divs // // ChrisMoody, CM_Price-Action-Bars-Price Patterns That Work // // Erwinbeckers SSL Channel //
Indicatore Pine Script®
di auroagwei
9